Share

Seiko Replica : A Chronograph Chronology

When Seiko Replica began designing Japan’s first watch chronograph, its goal was to produce a watch with status symbols like the chronograph device.

It is powered by a 12-core manual winding 5719 movement. The salient features of this 6.1 mm thick movement include a button to trigger the Replica Watches US function, horizontal coupling, and a guide wheel that can control start, stop and timing. Zero function.

The balance speed is 5.5 Hz or 39,600 vph. After turning on the timing device, the movement will run for 38 hours. The shell is made of steel, with a diameter of 38.2 mm and a thickness of 11.2 mm.

The Luxury Fake Watch has no elapsed time counter, so Seiko equips it with a rotating bezel that is calibrated in 1-minute increments. To measure intervals greater than 1 minute, the user starts the chronograph and then rotates the bezel until the tip of the large triangle is directly opposite the tip of the minute hand.

It looks like the date window at 12 o’clock is actually a golf course or points counter, operated by two buttons on the left side of the case. Another Fake Watch special feature is the small dial at 6 o’clock, which can be used as an elapsed minutes counter and can display the second hand. There is a tachymeter scale on the periphery of the dial.